Measuring material strength under tension forces to determine maximum load capacity and elongation properties.

• Plastic films
• Metal specimens
• Composite materials
• Textile fibers

• Ultimate tensile strength
• Yield strength
• Elongation at break
• Modulus of elasticity

Testing resistance to crushing forces for structural integrity assessment and material characterization.

• Foam materials
• Concrete specimens
• Corrugated boxes
• Structural components

• Compressive strength
• Compressive modulus
• Deflection at failure
• Energy absorption

Material response to bending forces for flexibility and rigidity measurement in beams and sheets.

• Plastic beams
• Metal strips
• Composite panels
• Ceramic specimens

• Flexural strength
• Flexural modulus
• Maximum deflection
• Strain at break

Cyclic loading and material endurance testing to predict product lifespan under repeated stress.

• Aircraft components
• Automotive parts
• Medical devices
• Electronic assemblies

• Cycles to failure
• Fatigue strength
• Crack propagation
• S-N curves

Material response to sudden applied forces to measure toughness and energy absorption capability.

• Safety equipment
• Protective packaging
• Automotive bumpers
• Sports equipment

• Impact strength
• Energy absorption
• Brittle-ductile transition
• Fracture toughness

Performing tensile tests at elevated temperatures using a split tube furnace to characterize metals, ceramics, and composites.

• Jet engine components
• Furnace linings
• High-performance alloys
• Ceramic matrix composites

• Elevated-temp tensile strength
• Yield strength at temp
• Ductility evaluation
• Creep strength

Long-term deformation under constant stress for material durability assessment over extended periods.

• Structural plastics
• High-temperature materials
• Geotextiles
• Pressure vessels

• Creep strain
• Creep modulus
• Time to rupture
• Stress relaxation

Determining resistance to tearing in films, textiles, and sheet materials for package durability.

• Plastic films
• Paper products
• Textile materials
• Membrane materials

• Tear resistance
• Tear propagation
• Initial tear force
• Average tear force

Evaluating package durability and product protection during handling and shipping scenarios.

• Consumer packaging
• Industrial containers
• Electronic packaging
• Medical device packaging

• Drop height
• Impact force
• Deformation analysis
• Protection efficiency

Testing the integrity of heat seals in packaging materials and containers for barrier performance.

• Food packaging
• Medical pouches
• Pharmaceutical blister packs
• Flexible pouches

• Seal strength
• Peel force
• Burst pressure
• Leak detection

Measuring resistance to penetration by sharp objects for barrier materials and protective packaging.

• Protective films
• Barrier materials
• Geomembranes
• Safety equipment

• Puncture resistance
• Energy to puncture
• Probe displacement
• Failure modes

Testing adhesive strength and bond performance for laminated materials and package seals.

• Laminated packaging
• Adhesive tapes
• Labels
• Bonded assemblies

• Peel strength
• Adhesion force
• Failure mode
• Peel angle effects

Oxygen transmission rate through materials for packaging quality assessment and shelf-life prediction.

• Food packaging
• Pharmaceutical containers
• Electronic packaging
• Medical devices

• O2 transmission rate
• Permeability coefficient
• Time lag
• Temperature effects

Water vapor transmission rate measurement for barrier material evaluation and moisture protection.

• Moisture barriers
• Pharmaceutical packaging
• Electronic protection
• Construction materials

• WVTR
• Permeance
• Humidity effects
• Temperature dependency

Evaluating sealing parameters for packaging materials and heat-sealed joints under various conditions.

• Heat-sealable films
• Medical pouches
• Food packaging
• Industrial seals

• Seal initiation
• Hot tack strength
• Seal curve analysis
• Optimization parameters

Determining the ratio of transverse strain to axial strain in a material under load, essential for understanding deformation characteristics.

• Aerospace components
• Civil engineering structures
• Automotive parts
• Advanced material research

• Poisson's Ratio
• Axial & transverse strain
• Stress-strain analysis

Conducting mechanical tests under controlled temperature and humidity conditions to simulate real-world service environments.

• Automotive interiors
• Electronic components
• Medical polymers
• Packaging in extreme climates

• Strength at temperature
• Properties at humidity
• Performance degradation
• Creep under thermal stress

Testing the sliding behavior of materials in contact with each other for packaging and handling.

• Packaging films
• Conveyor surfaces
• Safety materials
• Textile evaluation

• Static COF
• Kinetic COF
• Slip angle
• Surface roughness correlation

Measuring polymer flow characteristics for processing and quality control in plastic manufacturing.

• Plastic resins
• Polymer compounds
• Quality control
• Process optimization

• Melt flow index
• Melt volume rate
• Flow ratio
• Temperature sensitivity